 |
| Products Link to us Blogs Techies Contact Site Map |
                |
|
|
|
Print Head release
for newer generation printers Epson C64/C66/C84/C86/C88/D88 Epson Stylus Photo R200, R220, R300, R300M, R320, R340, R800, R1800, R2400 Unplug the printer, manually push the print head to the far right to take up any residual end play, usually about 1/4". To the left of the print head just directly under the lower belt is a white irregular piece of plastic that protrudes about an 1/8" forward from the back wall of the inside of the printer. If you have small ladies fingers then reach in under the belt and push the plastic into the back wall to release the print head. If you have lumberjack fingers then use a pencil with an eraser and do the same. This will release the print head allowing it to move from left to right. Copyright information.... This article is free for reproduction but must be reproduced in its entirety along with live links & this copyright statement must be included. Visit www.shopdyesub.com for free printer tech advice, web development articles, tutorials and tools! Affiliate ads do not have to be included. |
||
|
Epson Stylus C64/C66/C84/C86/C88/D88 |
